Check Out Our Ranges
CONSTRUCTION CHEMICALS – LIQUID FLASH 1
Liquid Flash I is a premixed one-pack, grey, water based, microfiber reinforced acrylic flexible waterproofing membrane, that is easily applied with a brush to form a resilient waterproof/ flashing membrane between different building surfaces.
Liquid Flash 1 will remain pliable and elastic and will bridge cracks and smooth irregular surfaces. Grey in color and can be over painted with water based acrylic paints to color match surroundings. The cured membrane is resistant to UV and mild chemical attack. Conforms to AS/NZS 4858 Class 3 membrane for use in internal wet areas.
Internal wet areas must be waterproofed in accordance with AS3740 and local regulations.
SDS UPDATED JULY 2024
LATICRETE – HYDRO BAN
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. Available in a variety of sizes.
HYDRO BAN is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane that bonds directly to a wide variety of substrates.
HYDRO BAN is a low VOC emitting product that has been GREENGUARD certified, it is a highly extensible Class 3 membrane suitable for Immersed Installations, Internal Wet Areas and External Above Ground use.
SDS UPDATED JULY 2024
Laticrete Hydro Ban Data Sheet
SCREED – ACT Traditional Floor
ACS Traditional Floor Screed is a mixture of double washed, graded coarse sands and cement. The sand used is rigorously screened and sieved to create a free flowing under tile screed that resists shrinking during drying.
The majority of clay fines from the sand have been removed during washing to reduce water demand and subsequent shrinkage in the screed bed, Screed is suitable for internal and external floor
applications, including balconies, bathroom floors and shower bases, in both bonded and un-bonded screed applications.
SDS UPDATED JULY 2024
Safety-Data-Sheet-SCR-100
SCR_100_PDS
WATERPROOFING – BOND BREAKER TAPE
Bond Breaker tape can be used for going over Junctions and Joints prior to waterproofing, At junctions in building surfaces and over cracks place a bond breaker tape.
Apply a 150mm wide thick coat of waterproofing membrane centrally over areas where the bond breaker is applied.
ARDEX WPM155 Rapid
WPM 155 Rapid is a Water-based polyurethane-acrylic waterproofing membrane developed for high performance under-tile waterproofing.
Suitable for commercial and residential internal/external wet areas, balconies, decks and other areas that will be tiled or otherwise protected from regular foot traffic.
This product is Not suitable for permanent immersed conditions.
For conditions of permanent immersion, it is recommended that ARDEX WPM 002 (Super flex Two Part) is used.
For further information please call ARDEX Technical Services.
SDS UPDATED JULY 2024
